Product Overview
Case of 125 AC Cords, Figure 8 Polarized, 6 ft
When comparing with other cords, please keep in mind:
- 1.) This is a non-integral cord. Most cheaper "competitors" are integral (see the difference below)
- 2.) This is a 6 foot long cord
- 3.) This is a 10 AMP cord, meaning it can carry up to 10 Amps at 125 volts. Most other cords are only rated up to 7 amps.
- 4.) This cord is UL (Underwriter Laboratories) listed
- 5.) This cord is rated to 105 degrees C (220 F)
A non-integral cord (which is what we're selling) is a cord where the conductors are double-insulated: There is the inner insulation which wraps around each conductor individually, and then there's another thick layer (the outer black layer you actually see). This non-integral (double-insulated) cord is stronger and more reliable than an integral (single-insulated) cordbecause it provides additional strength and protection for ultimate durability and safety.
To determine if a cord is double-insulated (non-integral) like ours, feel the flat portion of the cord with your fingers: If there is a groove running down the center of the cords (usually on both sides), then that's a good sign that the cord is only single-insulated.