Alternating Auto Flasher Relay + Bracket + Wire Harness 3 Prong EF30WWK Wig Wag

(No reviews yet) Write a Review
$9.99
SKU:
EF30WWK
UPC:
014271039898
Condition:
New
Shipping:
Calculated at Checkout
Bracket:
BR1
LED Compatible:
No
Pigtail:
EF3C/AR301C
Pilot Circuit:
No
Prongs:
3
Shape:
Square
Switching Power:
14 A
Type:
Electronic (Wig Wag)
Voltage:
11 to 15 V

Product Overview

3-Prong Wig Wag Flasher Kit



Supplied with bracket and wiring harness, as shown

This flasher has 3 prongs.The prong marked must be connected to the 12 Volt (battery) through a switch, the other two prongs are connected to the lamps. Each lamp should draw at least 10 Watt.


If you are using LED bulbs, or other bulbs that do not draw at least 0.8 Amp, you should use our LED-compatible flasher (EF30AL)


IMPORTANT #1: It is important that the X prong be wired to +12 Volts through a switch. If you don't, it will click and flash your lights ALL THE TIME

IMPORTANT #2: If your vehicle is wired for a "regular" flasher, you cannot simply plug in an alternating flasher and expect it to alternativey flash front and rear, or left and right. If that's what you're looking for, additional wiring is required.


Replaces
Napa EL12A2K
Carquest FSHEF30WWK
Tridon EL12A2K


Please review the specifications for suitable wiring harness.

Reviews

(No reviews yet) Write a Review